It appears that your cart is currently empty
Monday -Friday 8am-5pm PST Phone # (541)497-2882
All Products
S&B Intake Boot Kit for 1994-1996 Ford F250/F35...
Notes: Comes with (2) stainless steel hose clamps. Direct replacement for the failure prone orang...
Notes: Comes with (2) stainless steel hose clamps. Direct replacement for the failure prone orange turbo intake boot found on 1994-1996 OBS Powerstroke trucks. Does not fit E series Vans or 1997 trucks equipped with the black turbo intake boot. Replaces Ford Turbo Inlet - 1820102C2Vehicle Fitment Year Make Model Engine 1994-1996 Ford F-250 7.3L, Diesel 1994-1996 Ford F-350 7.3L, Diesel
$39.00
1992-97 Ford F-Series and Bronco Amp step mounting kit. (AMP STEPS NOT INCLUDED) Each Step Kit i...
1992-97 Ford F-Series and Bronco Amp step mounting kit. (AMP STEPS NOT INCLUDED) Each Step Kit includes all necessary mounting brackets and hardware to install your AMP/Realtruck (#7511301-A) steps onto your 1992-1997 Ford F-Series or Bronco. No other Model steps are compatible with this Kit. The kit includes 24 powdercoated mounting brackets, hardware, and door switches for a very straightforward installation process. Wiring diagrams and installation instructions are available on our webs...
$799.00
Fox ATS Steering Stabilizer Kit
When it comes to steering, 1980-1997 Ford trucks have always been plagued with loose, wandering, ...
When it comes to steering, 1980-1997 Ford trucks have always been plagued with loose, wandering, and unreliable steering. Then go and add larger, wider, heavier wheels and tires and these trucks can be quite scary to drive and hard to keep going straight down the road. Our D60 Heavy Duty Steering Kit fixes the problems with the stock steering linkage and makes these trucks drive much better, but large tires still have a lot of leverage on the steering system that cause undesirable handling ...
$760.00
Motor Mounts: 1980-1997 Ford F250/350 to 12v/24...
This is a bolt-in engine mount kit for installing a 12v or 24v Cummins into a 1980-1997 Ford F25...
This is a bolt-in engine mount kit for installing a 12v or 24v Cummins into a 1980-1997 Ford F250/350 and utilize the factory 2nd gen 12v Cummins motor mount bushing. This is a great option if your donor engine came with 2nd gen 12v motor mounts on the block. These mounts will position the engine to allow room for the factory Dodge mechanical fan. Available in two options: Fully Assembled Welded together and ready to bolt-in. DIY Come with all the steel plates and fasteners and you we...
$275.00 – $340.00
Motor Mounts: 1980-1997 Ford F250/350 to 12v/24...
If you are looking to do a Cummins swap on your 1980-1997 Ford Truck, these are the mounts for y...
If you are looking to do a Cummins swap on your 1980-1997 Ford Truck, these are the mounts for you. They work with 12v, 24v, and Common Rail Cummins engines. Our motor mounts are direct bolt in (no drilling or cutting required) and utilize a factory 1st Gen Dodge Cummins motor mount bushing. These mounts will work with Common Rail Cummins engines as well; you will just need to relocate the ECU. We chose to utilize the factory Dodge bushings because they provide great insulation from the v...
$375.00 – $450.00
OBS D60 Heavy Duty Steering Kit
*As of January 2025, Steering Kits are on a 2-3 week wait time. This steering kit is stronger, la...
*As of January 2025, Steering Kits are on a 2-3 week wait time. This steering kit is stronger, larger, longer lasting and cheaper to maintain than the stock Ford steering. We use Synergy Mfg Heavy Duty Metal on Metal Tie Rod Ends. This new version of our steering kit has a redesigned Y-Link adapter and uses double adjuster rod end tube adapters that make it even stronger than our previous version and much easier to adjust. We are also utilizing low misalignment dust boots on the tie rod en...
$1,100.00
OBS D60 Heavy Duty Tie Rod Kit
*IN STOCK!* This is a Heavy Duty Tie Rod Kit for OBS Ford Dana 60 front axles. This is the tie r...
*IN STOCK!* This is a Heavy Duty Tie Rod Kit for OBS Ford Dana 60 front axles. This is the tie rod and tie rod ends; it does NOT come with the drag link. We are selling this heavy duty tie rod kit for those of you that are running crossover steering. In the past, if you were running crossover steering you still had to use the weak, stock Ford tie rod, but with our new OBS D60 Heavy Duty Tie Rod Kit you are able to have a much stronger tie rod that utilizes Synergy MFG's Heavy Duty Metal on...
$600.00
These are replacement battery trays for your OBS Ford trucks and Broncos. If your stock battery ...
These are replacement battery trays for your OBS Ford trucks and Broncos. If your stock battery tray is all rotted out and missing the hold down or you are doing a diesel conversion and need a second battery, our OBS Ford Battery Tray's are what you need. They mount in the stock locations. *Unfortunately and fortunately, we are not Amazon. We create all custom parts and that takes time. Please expect 7-10 business day processing time.
$150.00 – $280.00
OBS Ford Coolant/Washer Reservoir Mount
This coolant/washer fluid reservoir mount is for OBS Fords that came with 7.5 or 5.8 gas engines....
This coolant/washer fluid reservoir mount is for OBS Fords that came with 7.5 or 5.8 gas engines. It relocates the reservoir to make room for a second battery to mount in the factory location, which is ideal for Cummins conversions. We also offer this reservoir mount with a mount for a 6 relay/fuse box for a very clean wiring solution for your Cummins conversion or addition accessories. This option comes with the 6 relay/fuse box and mounting hardware. It is up to the customer to supply the...
$75.00 – $105.00
OBS Ford Cummins AC Compressor Mount
This AC compressor mount allows you to keep your factory OBS Ford AC compressor and lines after y...
This AC compressor mount allows you to keep your factory OBS Ford AC compressor and lines after you have installed a 12v 6BT or 4BT Cummins engine and is compatible with the factory mechanical fan and all other standard, factory Cummins belt driven accessories. You will need a water neck/thermostat housing that has the outlet on the top or side of the housing; the factory Dodge housing will not work because it has the outlet coming out the front of the housing, which will cause interference ...
$390.00 – $515.00
OBS Ford ZF6 Transmission Crossmember
*As of October 10, these are on a 2-3 week wait. Please plan accordingly. We have updated and re...
*As of October 10, these are on a 2-3 week wait. Please plan accordingly. We have updated and re-released our ZF6 Transmission Crossmember! This is the ideal transmission crossmember for those that are looking to convert their truck to a ZF6 transmission. With this crossmember there is no need for any transmission tunnel or firewall modifications. This ZF6 Transmission Crossmember is made for 1980-1997 Ford F250's and F350's. It is fully fabricated out of CNC cut 1/4" steel and has a large ...
$650.00
*Expect a longer processing time, as these are made to order. OBS Fords, and all other factory t...
*Expect a longer processing time, as these are made to order. OBS Fords, and all other factory trucks for that matter, have severe axle wrap issues from the factory. Even at stock power levels, these trucks get very bad wheel hop. Traction bars eliminate these issues and keep the power directed to the road, where it should be. Our traction bars are top of the line, just like every other product we build. They are made with 2" x .25" DOM tube, utilize Currie Enterprises Johnny Joints for r...
$1,200.00