It appears that your cart is currently empty
Monday -Friday 8am-5pm PST Phone # (541)497-2882
New Products
4 Door Lit Windowed Sill Plates
These Sill plates are just like our standard sill's but with a twist. They're machined to accept ...
These Sill plates are just like our standard sill's but with a twist. They're machined to accept our lasered acrylic window that is back lit. Four LED lights are mounted per acrylic. All components are serviceable if needed. Comes with extra long leads to allow a user to wire to any power source they choose. These are not plug and play. The user will need to hard wire to there chosen power source. This kit includes 2 lit windowed sill plates with screws for installation.If You would like to o...
$503.99 – $658.99
2 Door Lit Windowed Sill Plates
These Sill plates are just like our standard sills but with a twist. They're machined to accept o...
These Sill plates are just like our standard sills but with a twist. They're machined to accept our lasered acrylic window that is back lit. Four LED lights are mounted per acrylic. All components are serviceable if needed. Comes with extra long leads to allow a user to wire to any power source they choose. These are not plug and play. The user will need to hard wire to there chosen power source. This kit includes 2 lit windowed sill plates with screws for installation.If You would like to or...
$270.99 – $380.99
KC300x Stage 1 Turbo (63/70) - 7.3 Powerstroke ...
KC300x Stage 1 OBS Gen 2 Supports: Up to 180cc/30% injectors Features & Details: Powder Co...
KC300x Stage 1 OBS Gen 2 Supports: Up to 180cc/30% injectors Features & Details: Powder Coating can take up to 3 weeks before it ships 100% drop in turbo (no modifications required) 63mm 7x7 SXE style compressor wheel with extended tip technology 70mm SXE style turbine wheel 4" ported compressor housing with drilled anti-surge for high flow High Flow Non-EBPV outlet flange Upgraded 360 Thrust Journal Bearing Design Comes with all gaskets and o-rings to install Comes with new 4" intake...
$1,190.00 – $1,440.00
KC Stock Plus Billet Turbo - 7.3 Powerstroke OB...
Not for sale in the state of California Stock Plus Billet Turbo Supports: Up to 160cc/Stock% in...
Not for sale in the state of California Stock Plus Billet Turbo Supports: Up to 160cc/Stock% injectors Features & Details: Powder Coating can take up 3 weeks before it ships 100% drop in turbo (no modifications required) KC Billet compressor wheel KC Turbos SXE style turbine wheel High Flow Non-EBPV outlet flange Upgraded 360 Thrust Journal Bearing Design Comes with all gaskets and o-rings to install Brand new! NO CORE required Description: The KC Stock Plus Billet Turbo is a stoc...
$1,090.00 – $1,340.00
Non-EBPV Turbo Pedestal - 7.3 Powerstroke OBS (...
Not available for sale in the State of California Non-EBPV Turbo Pedestal Features & Details...
Not available for sale in the State of California Non-EBPV Turbo Pedestal Features & Details: Pedestal includes 4 O-Rings. Also works with stock turbos. Description: Get rid of your EBPV (Exhaust Back Pressure Valve) with this Non-EBPV pedestal for the 7.3 Powerstroke OBS (94-98). This is a great addition when using the high flow outlet or a “gutted” stock outlet. This direct bolt-in replacement for the factory pedestal will eliminate leaks from the EBV actuator assembly and works with...
$199.00
S&B Intake Boot Kit for 1994-1996 Ford F250/F35...
Notes: Comes with (2) stainless steel hose clamps. Direct replacement for the failure prone orang...
Notes: Comes with (2) stainless steel hose clamps. Direct replacement for the failure prone orange turbo intake boot found on 1994-1996 OBS Powerstroke trucks. Does not fit E series Vans or 1997 trucks equipped with the black turbo intake boot. Replaces Ford Turbo Inlet - 1820102C2Vehicle Fitment Year Make Model Engine 1994-1996 Ford F-250 7.3L, Diesel 1994-1996 Ford F-350 7.3L, Diesel
$39.00
1992-97 Ford F-Series and Bronco Amp step mounting kit. (AMP STEPS NOT INCLUDED) Each Step Kit i...
1992-97 Ford F-Series and Bronco Amp step mounting kit. (AMP STEPS NOT INCLUDED) Each Step Kit includes all necessary mounting brackets and hardware to install your AMP/Realtruck (#7511301-A) steps onto your 1992-1997 Ford F-Series or Bronco. No other Model steps are compatible with this Kit. The kit includes 24 powdercoated mounting brackets, hardware, and door switches for a very straightforward installation process. Wiring diagrams and installation instructions are available on our webs...
$799.00
Power Window Regulator and lift Motor Assembly
Here at OBS Solutions we find it easier to do things right the first time! We now off...
Here at OBS Solutions we find it easier to do things right the first time! We now offer a complete window regulator assembly kit with new motor, door pins (AKA "Christmas Trees") New Rivet's and a video link below to get your Ford OBS Window rolling up and down smoothly! Like Limp Bizkit says..."Keep rollin' rollin' rollin'"Please note: On Some Models, the original motor will be clocked in a different position than what you have received. This will not affect the installat...
$109.00 – $218.00
Fox ATS Steering Stabilizer Kit
When it comes to steering, 1980-1997 Ford trucks have always been plagued with loose, wandering, ...
When it comes to steering, 1980-1997 Ford trucks have always been plagued with loose, wandering, and unreliable steering. Then go and add larger, wider, heavier wheels and tires and these trucks can be quite scary to drive and hard to keep going straight down the road. Our D60 Heavy Duty Steering Kit fixes the problems with the stock steering linkage and makes these trucks drive much better, but large tires still have a lot of leverage on the steering system that cause undesirable handling ...
$760.00
Motor Mounts: 1980-1997 Ford F250/350 to 12v/24...
This is a bolt-in engine mount kit for installing a 12v or 24v Cummins into a 1980-1997 Ford F25...
This is a bolt-in engine mount kit for installing a 12v or 24v Cummins into a 1980-1997 Ford F250/350 and utilize the factory 2nd gen 12v Cummins motor mount bushing. This is a great option if your donor engine came with 2nd gen 12v motor mounts on the block. These mounts will position the engine to allow room for the factory Dodge mechanical fan. Available in two options: Fully Assembled Welded together and ready to bolt-in. DIY Come with all the steel plates and fasteners and you we...
$275.00 – $340.00
Motor Mounts: 1980-1997 Ford F250/350 to 12v/24...
If you are looking to do a Cummins swap on your 1980-1997 Ford Truck, these are the mounts for y...
If you are looking to do a Cummins swap on your 1980-1997 Ford Truck, these are the mounts for you. They work with 12v, 24v, and Common Rail Cummins engines. Our motor mounts are direct bolt in (no drilling or cutting required) and utilize a factory 1st Gen Dodge Cummins motor mount bushing. These mounts will work with Common Rail Cummins engines as well; you will just need to relocate the ECU. We chose to utilize the factory Dodge bushings because they provide great insulation from the v...
$375.00 – $450.00
OBS D60 Heavy Duty Steering Kit
*As of January 2025, Steering Kits are on a 2-3 week wait time. This steering kit is stronger, la...
*As of January 2025, Steering Kits are on a 2-3 week wait time. This steering kit is stronger, larger, longer lasting and cheaper to maintain than the stock Ford steering. We use Synergy Mfg Heavy Duty Metal on Metal Tie Rod Ends. This new version of our steering kit has a redesigned Y-Link adapter and uses double adjuster rod end tube adapters that make it even stronger than our previous version and much easier to adjust. We are also utilizing low misalignment dust boots on the tie rod en...
$1,100.00