We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.

FORD-RHFK-005-Raw
5", 6" and 7" Lift Rear Shackle Flip Kit replaces both the shackle hanger and the spring hanger.
-Truck: 80-97 Ford F-250/350 and 92-18 E-350 or 80-96 Bronco/F-150 (requires additional drilling)
-Spring: Kits fit the 3.5" overall width spring.
These kits fit the 80-97 Ford F-250-350 platform, and can be modified to fit the Bronco / F-150 by re-drilling the frame mounting bolt holes.
Will not fit 78-79 without re-drilling pattern.
We also offer Heavy Duty Stock Replacement Shackles and 1" Lift Shackles as well
Kit is laser cut and cnc formed 1/4 and 3/16" PO steel, USA made!
-Remove Factory Rivets and hanger
-Install Rear Shackle Flip (there is a left and right, line holes in frame up with bracket so it runs close to parallel with the frame) secure using 1/2-1.5” bolts. It is very common to need to die grind 1 or 2 holes in the frame to line up with the bracket. Ford stamped and riveted everything so nothing is ever quite the same twice.
Do not try and install one side at a time, you must remove all hangers. After removal, install new brackets loose, push springs side to side to help set square. Install axle, loose, also push side to side to square. After all components have settled, tighten axle u bolts and then start working up to tighten the rest of the components. Failure to follow this process will result in many odd dimensions being off.
Pinion angle should be checked after installation, corrected if needed. Axle center line may have moved forward from stock. Giant lift springs will affect axle position more so and is very difficult to plan for without having parts assembled on the truck.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Three of my AC and heat panel fasteners were broken out and I had installed a double DIN (7”x4”) Pioneer radio so this bracket needed modified to fit this large radio. I cut just above the angled horizontal bracket on each side. The radio fits fine and the bracket is robust enough without the horizontal support. OBSSolutions fabricates great parts and solves any systemic issues of these trucks so they can be made better than new.
Great kit, awesome customer service. Perfect upgrade from the old bench seats in my 88.
This step makes it easy for me to get into the bed of my 1995 F250 2wd. Instructions were easy to follow, 20 minutes start to finish!! Looks great and does what I want. Picked it up Friday at the NO BS OBS Truck Show. Thanks for organizing the show and for the terrific parts!
These steps look the best imo, and there's no denying the quality of the design and materials. They are extremely robust, and should last a lifetime, while also being very sturdy compared to the hoop steps. Cost is the only con, but I'm sure r&d plus fabrication wasn't cheap, and I'm happy supporting OBS Solutions!
Very impressed with these lights both in quality and ease of install. They’re WAY brighter than the old lights. They plug in to the original bulb socket perfectly. The instructions are easy to follow. Can’t say enough good about them!
I have been searching for my "front end" pop forever, after researching and figuring out this was my cause. Quality is great, easy install, and thankfully no more pop.
Replaced my old warn out and cracked tank. glad to have one that doesn't leak and I dont have to worry about anything falling into it.
Hard to find this kit yet they had it and got it to me quickly. Thank you