It appears that your cart is currently empty
Ford used a Paper/Cardboard Shim Spacer on the 1980-97 F-Series and Broncos where the top of the ...
Ford used a Paper/Cardboard Shim Spacer on the 1980-97 F-Series and Broncos where the top of the front fenders bolt to the cab. We've found the original spacers on most trucks to be falling apart or missing altogether. This can cause many issues, including but not limited to poor body panel alignment and/or a loud "popping or clunking noise" when driving in and out of driveways. Our replacement Poly Shim Spacers are intended to replace and outlast the OEM Paper/Cardboard pieces your Truck o...
€37,70
Super Swing Lock Mirror Mounts
Introducing OBS Solutions Machined Aluminum Swing Lock Mirrors for OBS Ford Trucks and Bronco's! ...
Introducing OBS Solutions Machined Aluminum Swing Lock Mirrors for OBS Ford Trucks and Bronco's! These mirror's are a bolt-on upgrade for your tired, rusty and worn out OEM mirrors. These are designed for better fitment, durability and looks without sacrificing the nostalgia of the originals. They consist of machined 6061 Aluminum bracketry and our own proprietary 303 Stainless pivot/lock mechanism. Completely serviceable, very easy to install and use your OEM mounting gaskets. Stainless har...
€377,09
1992-97 Ford F-Series and Bronco Cab Steps These Side-Steps are designed to fit 1992-97 Ford F-S...
1992-97 Ford F-Series and Bronco Cab Steps These Side-Steps are designed to fit 1992-97 Ford F-Series and Bronco's. Different brackets are required depending on cab configuration, make sure you order correctly. This product is unlike any step ever created for these trucks. They've been designed for both maximum strength and stability, while requiring minimal drilling on the truck cab. Each step is adjustable and uses a support rod with heim joints to stabilize and reduce flex/movement. All ...
€630,70 – €1.271,78
GM Power Tow Mirror Conversion Harness
This product is intended to be used in OBS Ford Trucks NOT equipped with OEM Power mirrors and us...
This product is intended to be used in OBS Ford Trucks NOT equipped with OEM Power mirrors and using our Tow Mirror Bracket Kit. This kit provides wiring for both mirror power functions and light options. Our wires are labeled every five inches to help eliminate any confusion. We designed this wiring harness with the same colored wire as the boost auto sport mirrors. The harness can be used on All 1980-97 F-Series and Broncos, however the instructions are written for the 92-97 application. Fo...
€319,59
'92-'97 F-Series GM Tow Mirror Conversion Brackets
Double plate tow mirror with internal door brackets for use with '88-'98 GMC Style Tow Mirrors on...
Double plate tow mirror with internal door brackets for use with '88-'98 GMC Style Tow Mirrors on your '92-'97 F-Series Fords (can be used with later 80's era body style trucks with slight modifications). This mirror kit differs due to the fact our system utilizes dual plates to help strengthen the corner of the door and reinforce the inner part of the door where the weight of the heavy tow mirror lands. One kit will do both mirrors. For more pictures and information please check out our Ins...
€181,01
Description: This Mirror shim is made to fit Chevrolet tow Mirrors from 1988-1998. The shim adds...
Description: This Mirror shim is made to fit Chevrolet tow Mirrors from 1988-1998. The shim adds 2 degrees of downward angle and helps to level out the mirror. This shim is to be placed behind the mirror and mirror plate. This is a set of 2 Mirror Shims. These shims are aluminum and can be painted to match the mirror base. These shims come in our new and improved mirror bracket kit and will work with our old mirror bracket kit that did not include them.
€32,95
This is our Revised Inner Door Bracket that comes in our Full Mirror Kit. We are selling these s...
This is our Revised Inner Door Bracket that comes in our Full Mirror Kit. We are selling these separately for people that have already installed our competitors single plate system. This helps reduce, but does not completely solve, all the shakiness from using a single plate mirror kit. These also work with OEM stock mirrors as an extra level of strength and stability. New Instructions HereOld Instructions Here
€48,98
We have designed this product to allow you to mount any accessory under the hood of a bronco/f150...
We have designed this product to allow you to mount any accessory under the hood of a bronco/f150/f250/f350 gas only obs, like an arb or via air compressor. This product will require you to remove the factory tire iron and jack. It also requires you to relocate the vacuum canister. If you have a 460 style vacuum canister you will need to swap to a 302/351 style vacuum canister. The 460 vacuum is too large to fit in the fender well. This product is a blank plate, so that you are able to mount ...
€107,46
OBS Solutions Signature 6"-8" Suspension and St...
This kit contains the major componets needed to lift your 92-97 F-350. You have your choice of 4"...
This kit contains the major componets needed to lift your 92-97 F-350. You have your choice of 4" or 6" leaf springs. As we order from mutiple vendors lead times may vary. This kit does not include shipping. This is price is for local pick up only. These kits can not be shipped outside the US. THIS KIT REQUIRES YOU TO SHIP IN YOUR PASSENGER SIDE KNUCKLE TO SKYS OFFROAD FOR MACHINGING. THE CUSTOMER IS RESPONSIBLE FOR THE COST OF SHIPPING THE KNUCKLE TO AND FROM SKYS OFFROAD. THE COST OF THE ...
€5.467,98
BODY MOUNT KIT FOR 1980-1996 F-SERIES & 1997 SUPER DUTY A Smooth Ride That Lasts A Lifetime ...
BODY MOUNT KIT FOR 1980-1996 F-SERIES & 1997 SUPER DUTY A Smooth Ride That Lasts A Lifetime - Made from premium silicone so they won’t deteriorate like stock. - Corrosion resistant coated steel cups to prevent rust build up. - Brand new OEM designed bolts included. - Lifetime guarantee on parts and labor.**S&B Silicone Body Mounts are built to last and are backed by a lifetime warranty on parts and labor. Must be installed per Ford Instructions. $150 cap on labor.
€423,30
A hood latch relocation bracket so you can install an intercooler and still be able to operate th...
A hood latch relocation bracket so you can install an intercooler and still be able to operate the secondary hood release. This is being sold seperately but they also come in our Intercooler kit. We have designed this around the '99 to '02 super duty intercoolers. We have no information on other intercoolers for fitment of this product.Read Instructions Here
€32,95
Aussie Headlight Conversion Kit For 87'-91' F-S...
Converts your standard '87-'91 F-Series Bricknose Ford to the Australian style assembly that uses...
Converts your standard '87-'91 F-Series Bricknose Ford to the Australian style assembly that uses a 5 x 7 style headlight. Kit comes with two steel Aussie headlight brackets, Aussie headlight bezels, headlight retaining rings, stainless steel hardware, headlight pigtail to convert to the 5 x 7 style headlight, full color instructions with wiring diagram. NOTE: CUSTOMER MUST SUPPLY THEIR OWN HEADLIGHTS. Product may take up to 7 days to ship.Unfortunately due the availability of the bezels com...
€344,06