OBS-REG-001
We now offer a complete window regulator assembly's for both driver and passenger front doors. Each regulator will come with six rivets and six door panel retainer clips, for reinstalling the regulator and insuring your door panel has a snug fit to the door.
Please note: On Some Models, the original motor will be clocked in a different position apposed to the new regulator you receive.
Please watch our instructional video below for all the information on how to install the new regulator, and the tools you will need to do it.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Received the window actuators quickly and in perfect condition, good packaging. When I installed the driver's side, the wires of the harness basically fell out of the motor end plug terminals as if they weren't crimped properly. Unlike the factory motors which are hard-wired, there is a proprietary plug on the wire. Was able to crimp a pair of small female spade connectors to insert onto the protruding terminals in the motor "socket." Otherwise, everything works as expected. The plastic window slider piece is different from factory, but seems to be fine.
It's a complete kit that fit perfectly.
Great fit, video on the site was great to watch for help!
Very easy Install, and looks great. Works way better than the original hood springs.
Replaced the old hood springs with these gas filled struts and let me tell what a difference it is to open and close the hood…pure bliss.
It wasn’t easy to adjust the doors correctly to the new hinges and strikers but was worth the work. Soon I’ll be installing the power amp steps so this was a must.
Super easy install
Looks great , easy install and gives that little custom look to the bronco.
Delivery had no issues and it came packaged nice with all hardware.
Thanks OBS u dudes really filled another solution!
The block heater is very helpful for the older trucks, and adding the trickle charger was a stroke of genius on the part of OBS solutions and Carrick Customs! The bumper plug mount was easy to install, and it wasn't necessary to remove the front bumper. I recommend other enthusiasts purchase a rivet nut kit (from Harbor Freight or similar) to mount aftermarket accessories into sheet metal. This was my favored method to mount the charger, and it's possible to mount it so that the indicator LED is visible through the front grille when looking from a certain angle. Overall, I feel this kit has improved my ol' truck subtly, but significantly. It's very nice to have the block heater and charger all "nice and neat" instead of messing with dangling cords.
The s&b body mounts are great the make my truck ride so much better even with my bad shocks it rides night and day and the install tool that comes with them is a HUGE help thanks obs souloutions for all your help and always answering any questions i have had
If you have a slightly bent hood don’t use the top bolt on the hood side of the mount it will hit the shock and take your minimum bent hood to a full on unusable hood 😑…
Thought I had to purchase a new door because the tabs were broken off until I found this, super easy to install would definitely recommend
