CC1310R
If you are looking to do a Cummins swap on your 1980-1997 Ford Truck, these are the mounts for you. They work with 12v, 24v, and Common Rail Cummins engines. Our motor mounts are direct bolt in (no drilling or cutting required) and utilize a factory 1st Gen Dodge Cummins motor mount bushing.
These mounts will work with Common Rail Cummins engines as well; you will just need to relocate the ECU.
We chose to utilize the factory Dodge bushings because they provide great insulation from the vibration of the Cummins engine and they are readily available, making sourcing and replacing them when they wear out very easy.
Unlike others, these mounts have a built-in relief to fit the power steering hose that threads into the back of the power steering pump on the drivers side of the engine.
These motor mounts require you to "massage" the firewall in order to allow the engine to sit far enough back to utilize the factory, mechanical fan. This is standard with most OBS Ford Cummins conversion motor mounts.
If you are converting a truck that was originally an IDI diesel, you will either have to run electric fans or run a different radiator for the mechanical fan to fit. The stock IDI radiator is way over sized. If you want to run a mechanical fan in an IDI truck, you can run an aftermarket aluminum radiator for an IDI, a 7.3 Powerstroke radiator, 460 gas radiator, or a 1st gen Cummins radiator.
Made in the USA
What's included:
*Unfortunately and fortunately, we are not Amazon. We create all custom parts and that takes time. Please expect up to a 5-7 business days processing time.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Responsive.
I’m not to the point of using them yet, but they were well built, the complete kit and I’m sure they will be exactly what I needed to do this 5.9 Cummins to F250 conversion. They were exactly what was described, came with a diagram to know how to accomplish the installation and will save a lot of time from having to build them. Thank you
Great quality, heavy duty. Can’t wait to install
Mounts are of good quality but when the only option is 100$ 2 day shipping and you receive the items 3 weeks later kinda sucks I had to contact the actual manufacturer of the mounts to see what was going on because obs couldn't get into contact with them
Its the quality you expect from OBS Solutions.
Brackets were well made. One if the struts was dead out of the box, which isnt their fault. Called and had a replacement withing 3 days! Never any complaints dealing with these guys!
I was tired of going to the dump and having to jump up on the tail gate with my knees cause I’m to lazy to roll up my bed cover to use the tire as a step anyways this was super easy to put on and works / looks great my truck has a 8 inch lift with 38s
I’ll be honest and say the product was great quality but I dont think ill use them! They’re kinda far out to the side and I almost feel like I don’t see anymore than I did with the smaller mirrors. I’ll keep them in case I go a different route but I ended up taking them off! I wish they came with a lower convex mirror like a newer duty does. That would help tremendously.
Very well made can't go wrong with obs.
This was a great upgrade for my 1995 F-150 (5.0 V8). I will make a note: there will be a spare negative cable. It's going to be the one that has "Body Frame" on one end, slightly longer than the negative that runs from the solenoid to the battery.
I was tired of going to the dump and having to jump up on the tail gate with my knees cause I’m to lazy to roll up my bed cover to use the tire as a step anyways this was super easy to put on and works / looks great my truck has a 8 inch lift with 38s
Excellent quality, easy to install, get rid of your hood bending coil springs! Anything these guys make is top notch quality!
Very sturdy , really like the short tucked in design.
I feel they need to add some adhesive where some of the push clips are to shallow of a hole to hold in. But quality of this is awesome
Added these (2”) to my truck along with the superduty leaf spring shackles to level my truck to match the RSK kit in the front. Leveled it out nicely. With the boomerang shackles, shackle flip kit and superduty springs it lifted the rear of the truck about 2.5inches total.
