Click the link below for Instructions:
Each Step Kit includes all necessary mounting brackets and hardware to install your AMP/Realtruck (#7511301-A) steps onto your 1992-1997 Ford F-Series or Bronco. No other Model steps are compatible with this Kit.
The kit includes 24 powder coated mounting brackets, hardware, and door switches for a very straightforward installation process. Wiring diagrams and installation instructions are available on our website.
This product is unlike any other bracket kit currently on the market. It's designed for superior strength and stability by tieing the two most structural points of the cab. Each step is adjustable front to back using a heim joint while also minimizing flex and movement. Minimal drilling is required for installation; however, all holes are either hidden or barely noticeable once installation is complete.
For all cab configurations, each step is positioned using a pre-existing hole in the pinch weld beneath the cab rocker. Be sure to carefully read all instructions before starting installation!
We are currently working on adapting these steps for the 1987-1991 F-Series and Bronco models, as they have different pinch welds and mounting locations. Stay tuned for updates in the future.
What is needed to have a successful installation.
1. Read the instructions below before starting. (You Got This)
2. Drill bit Kit you will need up to a 5/8 drill bit. (if installing on Bronco or Extended cab)
3. Electrical connectors- butt, and spade, heat shrink.
4. 10-12 g red and black for power and ground. 18g for door switches.
5. Oh.. and a set of amp steps #7511301-A
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Absolutely impressed with the OBS Solutions Amp Step Bracket Kit for my Bronco. The fit and finish were top notch. The brackets are incredibly well thought out and solid. Everything lined up great and the design feels way stronger than other kits I’ve seen. The adjustable setup made dialing in the step position simple, and the final result looks clean. Definitely worth the money if you want a sturdy, well-engineered solution for AMP steps on a OBS Ford or Bronco. Highly recommend!
These went in pretty dang easy on my crew cab. Install took me a day, and most of that was just the wiring. The brackets fit perfect and they make for a sturdy step. My only hang up were the switches, after putting some noalox on the sheet metal screws they worked great.
97 Ford Crew Cab - The mechanical parts/adaptors are of good quality and not too difficult to install, but the electrical instructions could be improved, and I’d appreciate a hard copy to have under the truck.
To get a clean install, I ended up removing all of the thresholds, upper seat belt mounts, and lower panels except for the driver's side kick panel. Then I removed all of the plastic wire conduit, carefully laid out the wires, and made my plan for drilling, cutting and splicing where needed. The only wires that needed to be extended were the main power and ground. Once I had wiring neatly laid out, spliced and the heat shrink installed, I reinstalled the plastic conduit. I spent 24 hours on the disassembly, wiring, and reassembly, but it turned out nice. A few grommets of various sizes like single wire, ¼” and ½” I.D. will come in useful as well as some baling wire as a wire puller/fish tool.
In the end they turned out great and tucked away nicely, but it took me 30 hours to get them installed. I recommend this adapter kit!
Very good quality re-production part for the windshield washer reservoir. The OEM pump fit perfectly.
The light went in no problem and look great at night, the only down side was I ordered the wrong one, which is on me because I didn't realize I had the metal dome light. Only recommend to double check the kit you order. Sorry for the dirty dash, its a work in progress.
Originally planned to piece together a set of links for my 99 Dana 60 axle under my bullnose ford. When adding in the time wasted trying to source different parts and hardware as well as designing them this was far cheaper and very high quality. I ended up welding the tabs to the frame. I figured if I ever decided to run no sway bar they wouldn’t hurt being there. Even when pushed to the edge of the frame there is a little miss alignment from mount to the sway bar but I doubt it would ever hurt anything. I added some 1/2 inch aluminum round stock spacers between the links at the top mount to push the links inward toward the center of the frame and that seems to have helped the alignment of the links and made the mounting position more parallel. Overall super happy with these. If sky’s has made it for the front end of my truck it’s under there.
The cut was off so had to recut the side for the turbo to make it stright to fit
The light went in no problem and look great at night, the only down side was I ordered the wrong one, which is on me because I didn't realize I had the metal dome light. Only recommend to double check the kit you order. Sorry for the dirty dash, its a work in progress.
Originally planned to piece together a set of links for my 99 Dana 60 axle under my bullnose ford. When adding in the time wasted trying to source different parts and hardware as well as designing them this was far cheaper and very high quality. I ended up welding the tabs to the frame. I figured if I ever decided to run no sway bar they wouldn’t hurt being there. Even when pushed to the edge of the frame there is a little miss alignment from mount to the sway bar but I doubt it would ever hurt anything. I added some 1/2 inch aluminum round stock spacers between the links at the top mount to push the links inward toward the center of the frame and that seems to have helped the alignment of the links and made the mounting position more parallel. Overall super happy with these. If sky’s has made it for the front end of my truck it’s under there.
The steering linkage upgrade for my Dana 60 axle is top shelf. The rep at OBS was excellent to deal with, Replies to my questions were very quick and helpful. The package arrived in a timely manner and in excellent condition. I highly recommend OBS for your custom parts and obs parts.
Great product! Easy to install one step closer to getting my Lighting restored!!
Excellent product and solution for my OBS Bronco
