We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.

OBS-CREW-STP-R
These Side-Steps are designed to fit 1992-97 Ford F-Series and Bronco's. Different brackets are required depending on cab configuration, make sure you order correctly.
This product is unlike any step ever created for these trucks. They've been designed for both maximum strength and stability, while requiring minimal drilling on the truck cab. Each step is adjustable and uses a support rod with heim joints to stabilize and reduce flex/movement. All holes that are required to be drilled, are either hidden or not noticeable at all once installation is completed.
Each step, regardless of cab configuration is positioned by a pre-existing hole in the pinch weld under the cab rocker. Please read the entire instructions carefully!
We are actively working on adapting these steps for the earlier 1987-1991 F-Series and Bronco's. Those trucks have a different pinch weld and mounting locations. Stay tuned for these in the future.
Email us at services@obssoutions.net with any questions. Thank you for your purchase and for supporting our business!
Click INSTRUCTIONS for PDF instructions with photos included.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
These steps look the best imo, and there's no denying the quality of the design and materials. They are extremely robust, and should last a lifetime, while also being very sturdy compared to the hoop steps. Cost is the only con, but I'm sure r&d plus fabrication wasn't cheap, and I'm happy supporting OBS Solutions!
I opted for the raw aluminum for my 1994 F250. These steps bolted up in 2-3 hours. Directions were very detailed and easy to follow. Overall I think they match the styling of the OBS ford perfectly. The design is a welcome modern take on the classic (but flawed) older hoop step design. Thanks OBS Solutions for putting all the R&D into a proper step!
I hesitated forever because of the cost. All I can say is just do it. I haven’t thought about the price again from the moment I bolted them on the truck.The quality of the fabrication and finish of the final product is outstanding. They mount solid as a rock and look like it was designed by the Ford engineers alongside the actual truck. If you’re looking for a minimal step with form and function, this is it. They are so streamlined and pair perfectly with my bumper to really clean up the lines of this truck. 10/10
I ordered these because I'm knocking the tan color of my Eddie Bauer Bronco. The steps look much cleaner and modern than the original fiber glass rocker length board. The design is strong and well put together. I added a few more washers to the install than came with the kit but that's my preference and probably not necessary. Passenger side vertical bolts, I drilled them a little to close to the outside, but used a round file to open the holes a bit more and made it work. Other than that the instructions will walk you through just fine. The price is not cheap but the parts are quality and really clean up the appearance of your truck, if you require a step. No regrets so far.
Three of my AC and heat panel fasteners were broken out and I had installed a double DIN (7”x4”) Pioneer radio so this bracket needed modified to fit this large radio. I cut just above the angled horizontal bracket on each side. The radio fits fine and the bracket is robust enough without the horizontal support. OBSSolutions fabricates great parts and solves any systemic issues of these trucks so they can be made better than new.
It works. It took a lot of test fitting, I suppose after more than 30 years the door card has warped a bit. For the same reason getting a new one would look terrible in my truck.
It took a lot of test fitting, and being more aggressive with the Dremel on both the bracket and the door than I first thought would be necessary. Going slow a struggling it was a 4 hour slog, which also included drilling out and using plastics inserts for the screw holes in the door.
1 hour job second time around would be my estimate.
Restoring a 94 Bronco and was suggested by dealership that needed to replace fender shims - searched and found product on your website with helpful video - Thank You!!!
Hadn't installed yet waiting more parts for doors. But I can say the other purchases I have installed worked like a dream. And instalation was straight forward and easy.
Three of my AC and heat panel fasteners were broken out and I had installed a double DIN (7”x4”) Pioneer radio so this bracket needed modified to fit this large radio. I cut just above the angled horizontal bracket on each side. The radio fits fine and the bracket is robust enough without the horizontal support. OBSSolutions fabricates great parts and solves any systemic issues of these trucks so they can be made better than new.
Great kit, awesome customer service. Perfect upgrade from the old bench seats in my 88.
This step makes it easy for me to get into the bed of my 1995 F250 2wd. Instructions were easy to follow, 20 minutes start to finish!! Looks great and does what I want. Picked it up Friday at the NO BS OBS Truck Show. Thanks for organizing the show and for the terrific parts!
These steps look the best imo, and there's no denying the quality of the design and materials. They are extremely robust, and should last a lifetime, while also being very sturdy compared to the hoop steps. Cost is the only con, but I'm sure r&d plus fabrication wasn't cheap, and I'm happy supporting OBS Solutions!
Very impressed with these lights both in quality and ease of install. They’re WAY brighter than the old lights. They plug in to the original bulb socket perfectly. The instructions are easy to follow. Can’t say enough good about them!