FORD-SDBS-001-Raw
Converts to 99-16 Super Duty rear springs without heavily modifying stock shackle.
For 99-07 springs you will need to convert the front spring bolt from 18mm to 5/8"
using our Spring Eye Sleeves
For 08-16 Springs you will want to use our Rear SuperDuty Spring Swap Kit
Sold as a pair with bushings and sleeves. Available in bare steel or powdercoated black.
-Truck: 85-97 F-250/350
-Springs: 99-16 Rear Superduty Springs
4.5" Eye to eye, 5/8" Spring eye bolt hole, 9/16" hanger eye bolt hole. This is factory length, no lift!
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Always know it’s going to be a solid part coming from sky’s. Coupled these with the rear shackle flip 2” height to level my truck to match RSK kit in the front. Used some 99 f350 springs I had laying around being my stock ones were shot. Only complaint is the hardware is a hair short so the nylock nuts don’t really engage the threads. Hopefully after the bushing and everything settles I can re-torque the hardware and they’ll fully engage. Overall very satisfied.
Excellent quality, easy to install, get rid of your hood bending coil springs! Anything these guys make is top notch quality!
Very sturdy , really like the short tucked in design.
I feel they need to add some adhesive where some of the push clips are to shallow of a hole to hold in. But quality of this is awesome
Added these (2”) to my truck along with the superduty leaf spring shackles to level my truck to match the RSK kit in the front. Leveled it out nicely. With the boomerang shackles, shackle flip kit and superduty springs it lifted the rear of the truck about 2.5inches total.
Very nice quality, fit excellent, worth waiting for them to be back in stock.
I’ll be honest and say the product was great quality but I dont think ill use them! They’re kinda far out to the side and I almost feel like I don’t see anymore than I did with the smaller mirrors. I’ll keep them in case I go a different route but I ended up taking them off! I wish they came with a lower convex mirror like a newer duty does. That would help tremendously.
Very well made can't go wrong with obs.
This was a great upgrade for my 1995 F-150 (5.0 V8). I will make a note: there will be a spare negative cable. It's going to be the one that has "Body Frame" on one end, slightly longer than the negative that runs from the solenoid to the battery.
Excellent quality, easy to install, get rid of your hood bending coil springs! Anything these guys make is top notch quality!
New to me 96 with the E4OD had burnt sockets which caused a hard trans shift. Bought this, swapped in, worked like a dream. Do go with the lower wattage 912 bulb.
