1992-97 Ford F-250/350 2" OBS Spring COMPLETE 2WD to 4WD Kit
1992-97 Ford F-250/350 2" OBS Spring COMPLETE 2WD to 4WD Kit
Description:
This conversion kit facilitates the transition from 2WD to 4WD for your 92-97 F-250/350, offering all essential components to replace with an 85-97 Dana 60. By moving the shackle to the rear of the spring, the 2" lift kit improves the overall ride experience compared to the stock suspension. Say goodbye to the flimsy front shackle design and enjoy a uniform ride height with OBS springs, just like a factory Ford F-250/350.
**Select option one (BASIC) if you can obtain a 4x4 donor for the necessary shock mounts, brake line brackets, panhard bracket, rear blocks, etc.
**Select option two (DELUXE) if you only have an axle to start with.
This complete kit includes all components needed for the 2" front shackle reversal on a 92-97 F350 4x4, such as longer shocks, an adjustable panhard (trac) bar, and sway bar end link extensions.
NOTE: The intercooler specific kit simply has the cross bar lower to accommodate an intercooler. Otherwise the non intercooled version tucks it up behind the bumper for a cleaner look. If you have a diesel we recommend doing the intercooled version even if you don't have an intercooler just the option is always there.
Includes:
Basic Kit (FORD-OBSCK-2WD-1) Includes:
Now includes 4 shocks instead of two to make it a complete kit!
Please review the instructions under the installation section for all kits listed in this section.
Application:
-Truck: 92-97 Ford F-350 with 85-97 Dana 60 or 92-97 Ford F-250 with 85-97 Dana 60 already swapped in (additional parts needed for axle swap) -Spring: 80-97 52" Stock F-350 Leaf Springs
We have had a few customers with worn out spring bushings and sliders have issues with clearing the shackles on the 2" FSR kits with the military wrap. You need quality to spec parts to make this work.
It is common for the front frame horns to be spread due to age as the only thing holding the front of the frame together is the rivets at the engine cross member. You may need to pull the frame together to get the hanger on.
These trucks were not built to a high level of precision. Some of the rivet holes may need to be opened up with a die grinder as the holes may not line up perfectly.
Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, ge...
Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, gears and axles from the most extreme hits in off road driving. They also increase the structural rigidity of the differential, reducing deflection under high-torque situations that can put severe loads on vital internal parts. Diff Covers feature a durable powder coat finish and high strength steel fasteners for easy bolt-on installation. It’s no secret that the underside of your rig can take a bea...
Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, ...
Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, gears and axles from the most extreme hits in off road driving. They also increase the structural rigidity of the differential, reducing deflection under high-torque situations that can put severe loads on vital internal parts. Diff Covers feature a durable powder coat finish and high strength steel fasteners for easy bolt-on installation. It’s no secret that the underside of your rig can take a b...
*As of January 2025, Steering Kits are on a 2-3 week wait time.
This steering kit is stronger, la...
*As of January 2025, Steering Kits are on a 2-3 week wait time.
This steering kit is stronger, larger, longer lasting and cheaper to maintain than the stock Ford steering. We use Synergy Mfg Heavy Duty Metal on Metal Tie Rod Ends. This new version of our steering kit has a redesigned Y-Link adapter and uses double adjuster rod end tube adapters that make it even stronger than our previous version and much easier to adjust. We are also utilizing low misalignment dust boots on the tie rod en...
This completely new CAD designed, laser cut bracket is engineered to accept one of the best power...
This completely new CAD designed, laser cut bracket is engineered to accept one of the best power steering pumps ever made! This is a complete replacement unit for your 7.5L 460 V8 that even accepts your factory air conditioning compressor and uses all your original mounting hardware. The Saginaw power steering pump is an all metal construction and boasts much higher operating pressures than your stock system. This is gonna give you the positive feel you've been looking for in your steering! ...
The fit is perfect for my cclb dually which also has a fiberglass body kit on it. No drone and very quiet in-cab. Sounds great when you get on the throttle
(1994-1997) - Diamond Eye 4" Muffler Kit
William Beck
Great Kit!
These rocker guards do a shockingly good job of keeping rocks and mud etc off the rockers. Especially with stock offset wheels. The video instructions are great, and the fit on these is excellent. I've torn the fronts off on accident a few times, and I'll keep buying replacements. They just work that well.
Front and Rear Rocker Guard Kit
Troy HESSELGESSER
Rear bed step.
Absolutely a need. The step makes it so easy to step in to the bed. Installation was a breeze. I have to say again, A+ on the shipping.
1980-1997 Ford F-Series Rear Bed Step Kit
MARTY FALCON
door panel repair kit
all of the parts fit well as expected, shipping was fast, and cost was great. easy install after watching the video.
1992-97 F-Series Single Cab, Extended Cab, and Bronco with Front ONLY Power Windows Driver Side Door Panel Repair Bracket
Kaleb curtiss
Couldn’t be any better
Insanely easy install. Totally fixes your derpy control bezel flopping around. Mine is nice and tight now. The YouTube video on it was very explanatory and it was totally worth it. Thanks!
Door Panel Repair Bracket For Crew Cab 4-Door Power Window Driver Side Only
The fit is perfect for my cclb dually which also has a fiberglass body kit on it. No drone and very quiet in-cab. Sounds great when you get on the throttle
Great product, although it's a little expensive for a couple brackets a d some bolts your buying yourself some time as they have figured out how to stack everything nice together nice and tight the first time. Only reason i didn't give it 5 starts is because i had to make new brackets to mount my a/c condensor as none of the replacement ones on rock auto or locally at the parts store would work with the mount.
I used these on my 91 f350 when putting a 7.3 powerstroke in with intercooler and 6.0 trans cooler and everything fit properly and made the install so much easier
These rocker guards do a shockingly good job of keeping rocks and mud etc off the rockers. Especially with stock offset wheels. The video instructions are great, and the fit on these is excellent. I've torn the fronts off on accident a few times, and I'll keep buying replacements. They just work that well.
