OBS-REG-001
We now offer a complete window regulator assembly's for both driver and passenger front doors. Each regulator will come with six rivets and six door panel retainer clips, for reinstalling the regulator and insuring your door panel has a snug fit to the door.
Please note: On Some Models, the original motor will be clocked in a different position apposed to the new regulator you receive.
Please watch our instructional video below for all the information on how to install the new regulator, and the tools you will need to do it.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Received the window actuators quickly and in perfect condition, good packaging. When I installed the driver's side, the wires of the harness basically fell out of the motor end plug terminals as if they weren't crimped properly. Unlike the factory motors which are hard-wired, there is a proprietary plug on the wire. Was able to crimp a pair of small female spade connectors to insert onto the protruding terminals in the motor "socket." Otherwise, everything works as expected. The plastic window slider piece is different from factory, but seems to be fine.
It's a complete kit that fit perfectly.
Great fit, video on the site was great to watch for help!
97 Ford Crew Cab - The mechanical parts/adaptors are of good quality and not too difficult to install, but the electrical instructions could be improved, and I’d appreciate a hard copy to have under the truck.
To get a clean install, I ended up removing all of the thresholds, upper seat belt mounts, and lower panels except for the driver's side kick panel. Then I removed all of the plastic wire conduit, carefully laid out the wires, and made my plan for drilling, cutting and splicing where needed. The only wires that needed to be extended were the main power and ground. Once I had wiring neatly laid out, spliced and the heat shrink installed, I reinstalled the plastic conduit. I spent 24 hours on the disassembly, wiring, and reassembly, but it turned out nice. A few grommets of various sizes like single wire, ¼” and ½” I.D. will come in useful as well as some baling wire as a wire puller/fish tool.
In the end they turned out great and tucked away nicely, but it took me 30 hours to get them installed. I recommend this adapter kit!
Very good quality re-production part for the windshield washer reservoir. The OEM pump fit perfectly.
The light went in no problem and look great at night, the only down side was I ordered the wrong one, which is on me because I didn't realize I had the metal dome light. Only recommend to double check the kit you order. Sorry for the dirty dash, its a work in progress.
Originally planned to piece together a set of links for my 99 Dana 60 axle under my bullnose ford. When adding in the time wasted trying to source different parts and hardware as well as designing them this was far cheaper and very high quality. I ended up welding the tabs to the frame. I figured if I ever decided to run no sway bar they wouldn’t hurt being there. Even when pushed to the edge of the frame there is a little miss alignment from mount to the sway bar but I doubt it would ever hurt anything. I added some 1/2 inch aluminum round stock spacers between the links at the top mount to push the links inward toward the center of the frame and that seems to have helped the alignment of the links and made the mounting position more parallel. Overall super happy with these. If sky’s has made it for the front end of my truck it’s under there.
The cut was off so had to recut the side for the turbo to make it stright to fit
The light went in no problem and look great at night, the only down side was I ordered the wrong one, which is on me because I didn't realize I had the metal dome light. Only recommend to double check the kit you order. Sorry for the dirty dash, its a work in progress.
Originally planned to piece together a set of links for my 99 Dana 60 axle under my bullnose ford. When adding in the time wasted trying to source different parts and hardware as well as designing them this was far cheaper and very high quality. I ended up welding the tabs to the frame. I figured if I ever decided to run no sway bar they wouldn’t hurt being there. Even when pushed to the edge of the frame there is a little miss alignment from mount to the sway bar but I doubt it would ever hurt anything. I added some 1/2 inch aluminum round stock spacers between the links at the top mount to push the links inward toward the center of the frame and that seems to have helped the alignment of the links and made the mounting position more parallel. Overall super happy with these. If sky’s has made it for the front end of my truck it’s under there.
The steering linkage upgrade for my Dana 60 axle is top shelf. The rep at OBS was excellent to deal with, Replies to my questions were very quick and helpful. The package arrived in a timely manner and in excellent condition. I highly recommend OBS for your custom parts and obs parts.
Great product! Easy to install one step closer to getting my Lighting restored!!
Excellent product and solution for my OBS Bronco
