FORD-APBSDAC-001
-Aids in Superduty axle swaps by offering a solution for the panhard mount being in front-of-the-axle. (Instead of the factory 85-97 behind-the-axle mounts on 85-97 Dana 60's)
-Allows use of Superduty Dana 50/60 factory panhard mount
-Designed for 2-4" lifts, can work up to a 6" but we recommend our crossover panhard kit at that height.
-Larger lifts will need our Crossover Panhard and Crossover Steering kits.
Application:
-Truck: 92-97 Ford F-350 or Solid Axle Converted F-250 (Can be used with 80-91 trucks with some additional shimming / fabrication)
-Axle: 99-04 Ford Superduty Dana 50/60
See pictures above for installation detail.
The bracket bolts on to the drivers side of the frame.
The brace supports and strengthens the bracket to the engine cradle cross member.
The formed bar connects the axle to the bracket.
In some instances you will need to clearance the cross member to clear the bar.
80-91 trucks- the frame on these trucks have an additional 1/4" layer of steel folded over on part of the bottom of the frame where this bracket attaches. The bracket needs a 1/4" shim made to mount it correctly.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
It's a great product and it was really helpful to with with OBS solutions. I did not want to use cheap overseas parts on my F350 so this heavy duty linkage and tie rod ends were exactly what i was looking for. It's MUCH bigger than the stock linkage so keep that in mind- if you're tryin to use a steering stabilizer you'll need new hardware.
had a couple broken plastic on the a/c control and this repair bracket worked out perfectly.
No more spongy pedal. Brakes are solid and has the stopping power you can feel. Overall installation was pretty simple and easy. OBS Solution thanks for a great product!!
good quality kit install went well and performs well
The kit came quick and was just as described. Best price my husband was able to find.
This is the perfect fit and perfect look to bring your truck into the 20th century
Three of my AC and heat panel fasteners were broken out and I had installed a double DIN (7”x4”) Pioneer radio so this bracket needed modified to fit this large radio. I cut just above the angled horizontal bracket on each side. The radio fits fine and the bracket is robust enough without the horizontal support. OBSSolutions fabricates great parts and solves any systemic issues of these trucks so they can be made better than new.
Great kit, awesome customer service. Perfect upgrade from the old bench seats in my 88.
This step makes it easy for me to get into the bed of my 1995 F250 2wd. Instructions were easy to follow, 20 minutes start to finish!! Looks great and does what I want. Picked it up Friday at the NO BS OBS Truck Show. Thanks for organizing the show and for the terrific parts!
These steps look the best imo, and there's no denying the quality of the design and materials. They are extremely robust, and should last a lifetime, while also being very sturdy compared to the hoop steps. Cost is the only con, but I'm sure r&d plus fabrication wasn't cheap, and I'm happy supporting OBS Solutions!
