FORD-APBSDAC-001
-Aids in Superduty axle swaps by offering a solution for the panhard mount being in front-of-the-axle. (Instead of the factory 85-97 behind-the-axle mounts on 85-97 Dana 60's)
-Allows use of Superduty Dana 50/60 factory panhard mount
-Designed for 2-4" lifts, can work up to a 6" but we recommend our crossover panhard kit at that height.
-Larger lifts will need our Crossover Panhard and Crossover Steering kits.
Application:
-Truck: 92-97 Ford F-350 or Solid Axle Converted F-250 (Can be used with 80-91 trucks with some additional shimming / fabrication)
-Axle: 99-04 Ford Superduty Dana 50/60
See pictures above for installation detail.
The bracket bolts on to the drivers side of the frame.
The brace supports and strengthens the bracket to the engine cradle cross member.
The formed bar connects the axle to the bracket.
In some instances you will need to clearance the cross member to clear the bar.
80-91 trucks- the frame on these trucks have an additional 1/4" layer of steel folded over on part of the bottom of the frame where this bracket attaches. The bracket needs a 1/4" shim made to mount it correctly.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Very easy Install, and looks great. Works way better than the original hood springs.
Replaced the old hood springs with these gas filled struts and let me tell what a difference it is to open and close the hood…pure bliss.
It wasn’t easy to adjust the doors correctly to the new hinges and strikers but was worth the work. Soon I’ll be installing the power amp steps so this was a must.
Super easy install
Looks great , easy install and gives that little custom look to the bronco.
Delivery had no issues and it came packaged nice with all hardware.
Thanks OBS u dudes really filled another solution!
The s&b body mounts are great the make my truck ride so much better even with my bad shocks it rides night and day and the install tool that comes with them is a HUGE help thanks obs souloutions for all your help and always answering any questions i have had
If you have a slightly bent hood don’t use the top bolt on the hood side of the mount it will hit the shock and take your minimum bent hood to a full on unusable hood 😑…
Thought I had to purchase a new door because the tabs were broken off until I found this, super easy to install would definitely recommend
Very easy Install, and looks great. Works way better than the original hood springs.
IM BUILDING A SHOW TRUCK AND THIS FITS PERFECTLY
