This package includes the following components needed to perform a complete overhaul on your 89-96 F150 or Bronco's steering system:
THIS SYSTEM FITS 1989-1996 302/351 BRONCO/F150/F250 SERPENTINE SYSTEMS ONLY!
Saginaw Pump Upgrade-
This completely new CAD designed, laser cut bracket is engineered to accept one of the best power steering pumps ever made! This is a complete replacement unit for your 302/351 that even accepts your factory air conditioning compressor and uses all your original mounting hardware. The Saginaw power steering pump is an all metal construction unit and boasts much higher operating pressures than your stock system. This is gonna give you the positive feel you've been looking for in your steering! We've included all necessary fittings, hoses, serpentine belt and a billet aluminum pulley to complete this easy installation. We recommend using ACDelco GM Original Equipment Power Steering Fluid or Swepco 715. DO NOT USE ATF!
THIS SYSTEM IS ONLY A DIRECT FIT FOR 1989-1996 302/351 BRONCO/F150/F250 SERPENTINE SYSTEMS. IT CAN BE USED ON 87/88 302/351 SERPENTINE SYSTEMS BUT THE FACTORY 3/8 x16 BOLTS HOLDING THE AC COMPRESSOR ON WILL HAVE TO BE SWAPPED OUT FOR THE 89 TO 96 8MM X 1.25 MERTRIC BOLTS. THESE BOLTS CAN BE EASILY SOURCED USED FROM MANY DIFFERNT FORD VEHICLES OR HERE IS A FORD PART NUMBER THAT YOU CAN ORDER:
FORD W704750-S437
HD Tie Rod Kit-
This Heavy Duty Tie Rod Kit is a Direct Stock Replacement and requires zero suspension modifications to be used on your 1980-1996 Bronco or F150. From completely stock daily drivers to long travel weekend warriors, this is the setup you need! It retains all factory steering geometry, however it has a massive strength advantage due to its much larger diameter components. We've packaged this kit together utilizing the best tie rod ends and components available on the market to make sure you get the strength and reliability you're looking for.
Factory Steering Box-
Swap out that sloppy steering gear box for a premium rebuilt factory unit! All internals are meticulously inspected, crack checked and all worn components and seals are replaced.
Borgeson Steering Shaft-
Your factory steering shaft is old and utilizes a rubber "Rag Joint" connection at the steering box. Over the years, this material is prone to breaking down and causing large amounts of slop in your vehicles steering. This Borgeson Steering Shaft eliminates the "rag joint" and replaces it with a nice steel u-joints that pivot on heavy duty needle bearings.
Please refer to our Install Guide Page for a most up to date installation guide.
