We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
COS-RA-05
NOW AVAILABLE - OUR LONG AWAITED COIL OVER SHOCK CONVERSION KIT!
Improve the ride quality of your 92-97 F-250/350 even further with our complete 05+ Coil over front axle swap kit
Application:
-Truck: 92-97 Ford F250/350 4x4
-Axle: 05-16 Ford F-250/350 Dana 60
Includes:
R/L Coil-Over Mounts
R/L Radius Arm Frame Brackets or 4 link brackets
R/L Swaybar Brackets
Panhard Bracket
Machined Pitman Arm included (choice of flat or drop)
Hardware-Grade 8 or equivalent
Additional Information:
Donor axles needed for the swap. 05-16 front Dana 60 from F-250/F-350. Axle, radius arms, trac bar, sway bar with links, steering from pit man down. 8x170 bolt pattern. 05-10 F-450 axle 10 lug can be used but will require rear 10 lug DRW axle.
Rear axle can be 99-16. The 05-16 axle is preferred for larger brakes. The 08-16 axle with leaf springs is best if using the Ford-RSDSW leaf spring swap kit. 2wd conversions should acquire the factory rear block from the 4wd. For stock height leveled setup our 4" RSDSW can be used to eliminate the block for a net zero lift.
If you have an unknown front axle, the sway bar links will be the best way to determine what you have. They are as follows:
05-07 bushing on bottom, stud top
08-10 bushing top and bottom
11-1 stud top and bottom
FITMENT NOTES: Where the coil buckets and radius arm mounts the frames are all the same from 80-97 F150 through F350. Where the track bar (panhard) mounts on the frame rail there is an additional layer of 1/4" steel that wraps around to on the bottom of the frame rail on some 80-91 trucks. This requires a 1/4" shim to give the bracket a surface to mount to.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
I put this beefy steering setup in my lifted obs ford, and boy did it make a difference. Also, nothing better than buying from a local to me shop.
A customer brought us his truck and a set of the mirror mounting plates. I've been in the industry over 30 years, I'm really impressed with your product. It was very easy and straight forward to install and came out great. Thanks for making a product that works well!
Seth Hicks
Auto Graphicks
Glad I waited to have this kit vs others. Quality of the kit was better than expected. Instructions tell you exactly what you need to do. Installation was a breeze even for one person and basic tools needed. 100% recommend this kit if you have been procrastinating about it.
The kit is phenomenal, super easy, straight forward install. Looks amazing and great quality. Only issue I had was bolts provided were not long enough in my opinion to go through the shock mount, frame and the C notch. A 1.75 inch bolt would be perfect, I sourced 2 inch bolts, again just my preference as I did not think they would be long enough. Keep it up, love the products! Feel free to reach out would love to chat about install.
Straightforward install. Really dresses up the undercarriage.
I replaced the old worn shaft on my ‘94 F-150 during a steering box swap. It fit like OEM and took about 15 minutes once the box was in. It feels well built, and the play I had in the wheel is gone. Recommended.
I put this beefy steering setup in my lifted obs ford, and boy did it make a difference. Also, nothing better than buying from a local to me shop.
these guys are the absolute best when it comes to OBS products
Everything I’ve ordered is good stuff. Top notch. Love getting parts from these fellas.