Products

78-97 Ford 4x4 2" & 4.5" Rear Shackle Flip Kits

Description: - Rear shackle flip kits position the shackle downward in order to allow the rear le...

Description: - Rear shackle flip kits position the shackle downward in order to allow the rear leaf springs to follow a more natural arc instead of fight the leaf spring under compression. -Noticeable ride improvement. Application: -Truck: 78-97 Ford F-250/350, 92-18 E-350,  80-96 Bronco/F-150 -Spring: Kits fit the 3.5" overall width spring. Includes: -Includes rear hangers and hardware for rear bolting hangers to frame.  -Sold in a set to replace each side of the vehicle. -Hangers use factor...

80-97 F-250/350 08-16' SD Rear Spring Swap

Description: Provides much better ride than stock by adapting the newer 8" longer rear Super Dut...

Description: Provides much better ride than stock by adapting the newer 8" longer rear Super Duty leaf springs. More robust brackets than factory Can eliminate factory block Locates off of factory holes, no measuring required. Retains factory E-brake 2.5" lift with 43-1849 11-16' F250SD 2WD/4WD Rear Springs Application: Truck: 80-97 Ford F250/350 and 92-18 E350 or 80-96 Bronco/F-150 (requires additional drilling) Springs: Factory design 08-16 Super Duty Rear Leaf Spring. Long travel larg...

85-91 Ford F-250 / F-350 2" Front Shackle Rever...

Description: Adapts the much better riding 99-04 Superduty Springs Provides much better ride tha...

Description: Adapts the much better riding 99-04 Superduty Springs Provides much better ride than stock by moving shackle to rear of spring. Eliminates the weak front shackle design. Levels truck by lifting 2" and allows use of 35's (minor trimming may be needed) NEW OPTION! 2wd -> 4wd frame plates. Put a Dana 60 in your 2wd!- This kit is designed for 4x4 trucks. Additional parts are necessary for a 2wd truck. The 2wd frame plates are designed to make mounting the spring hanger easier. Th...

85-97 Ford F-250/350 - SuperDuty Rear Leaf Spri...

Description: Converts to 99-16 Super Duty rear springs without heavily modifying stock shackle. F...

Description: Converts to 99-16 Super Duty rear springs without heavily modifying stock shackle. For 99-07 springs you will need to convert the front spring bolt from 18mm to 5/8" using our Spring Eye Sleeves For 08-16 Springs you will want to use our Rear SuperDuty Spring Swap Kit Includes: Sold as a pair with bushings and sleeves. Available in bare steel or powdercoated black. Application: -Truck: 85-97 F-250/350 -Springs: 99-16 Rear Superduty Springs Additional Information: 4.5" Eye to eye...

92-97 F-250 / F-350 Frame Reinforcement Kit

Fix the weak point in your OBS frame. The section behind the shackle mount is where these frames ...

Fix the weak point in your OBS frame. The section behind the shackle mount is where these frames tend to crack and fail. We designed this kit in two pieces to box in the C-channel section that Ford missed and another to fill in the shackle pocket that isn't used when doing a Coil Swap conversion or a Front Shackle Reversal. This is designed for the 4x4 frame. A 2wd version will be available in the future. As you can see on this frame we are doing a coil swap and filled all unused holes, inclu...

94-97 7.3L OBS COMPLETE FUEL SYSTEM

Irate Diesel OBS Fuel System with regulated return:IDP Billet Block with 304ss mounting bracket, ...

Irate Diesel OBS Fuel System with regulated return:IDP Billet Block with 304ss mounting bracket, BOSCH 464-200 diesel pump, Pushloc hose with quick connects from selector valve to motor and return quick connect from regulator to OEM quick connect below steering shaft. Included is also IDP regulated return system, wiring harness, plug for valley and all JIC fittings needed. Our kit will work with factory turbo setups as well as our T4 mount.  This kit includes all parts and pieces necessary fo...

99-03 power steering pump

Accessory Mounting Plate Kit

We have designed this product to allow you to mount any accessory under the hood of a bronco/f150...

We have designed this product to allow you to mount any accessory under the hood of a bronco/f150/f250/f350 gas only obs, like an arb or via air compressor. This product will require you to remove the factory tire iron and jack. It also requires you to relocate the vacuum canister. If you have a 460 style vacuum canister you will need to swap to a 302/351 style vacuum canister. The 460 vacuum is too large to fit in the fender well. This product is a blank plate, so that you are able to mount ...