We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.

801312
New option - Low profile shock mounts! This design keeps the shock mounts close to the stock location. If you already have the correct length shocks, this will allow you to swap to the crossover panhard without changing your shocks.
We sill still offer our current design that relocates the lower shock mount up 4" to the top of the panhard bracket. This is useful for fitting shocks with larger lifts.
-Panhard bar (aka trac bar) solution for lifts of 5" and greater.
-Designed to be used with crossover steering to minimize bump steer.
-Incorporates a U-bolt flip kit, single shock mount or dual shock lower mount, and a panhard bar.
-When combined with our crossover steering kit, it will get both the drag link and panhard bar up above the axle and as flat and parallel as possible for the best handling. This combination eliminates bump steer and tie rod roll.
-Dual shock option includes CNC machined spacers to line your shocks up perfectly to our upper Dual Shock Mounts FORD-BDSM.
-Truck: 85-97 Ford F-350 and Solid Axle Converted F-250
-Axle: 85-97 Ford Dana 60
or
99-04 Ford Super Duty Dana 50/60
Kit is bolt on and requires notching driver side axle housing slightly for U-bolt fitment.
Removal of the factory passenger panhard mount bracket.
Panhard bars are made to maximize lift height length and can be trimmed slightly if needed.
Check out our Ford Dana 60 Ball Joint Crossover Steering Conversion!
Kit is designed around lift spring packs 3" or greater in thickness. Thinned packs will require special length U-bolts.
We accept product returns within 30-days after you have received your order. All returns are subject up to a 20% restocking fee after approval.
Three of my AC and heat panel fasteners were broken out and I had installed a double DIN (7”x4”) Pioneer radio so this bracket needed modified to fit this large radio. I cut just above the angled horizontal bracket on each side. The radio fits fine and the bracket is robust enough without the horizontal support. OBSSolutions fabricates great parts and solves any systemic issues of these trucks so they can be made better than new.
It works. It took a lot of test fitting, I suppose after more than 30 years the door card has warped a bit. For the same reason getting a new one would look terrible in my truck.
It took a lot of test fitting, and being more aggressive with the Dremel on both the bracket and the door than I first thought would be necessary. Going slow a struggling it was a 4 hour slog, which also included drilling out and using plastics inserts for the screw holes in the door.
1 hour job second time around would be my estimate.
Restoring a 94 Bronco and was suggested by dealership that needed to replace fender shims - searched and found product on your website with helpful video - Thank You!!!
Hadn't installed yet waiting more parts for doors. But I can say the other purchases I have installed worked like a dream. And instalation was straight forward and easy.
Three of my AC and heat panel fasteners were broken out and I had installed a double DIN (7”x4”) Pioneer radio so this bracket needed modified to fit this large radio. I cut just above the angled horizontal bracket on each side. The radio fits fine and the bracket is robust enough without the horizontal support. OBSSolutions fabricates great parts and solves any systemic issues of these trucks so they can be made better than new.
Great kit, awesome customer service. Perfect upgrade from the old bench seats in my 88.
This step makes it easy for me to get into the bed of my 1995 F250 2wd. Instructions were easy to follow, 20 minutes start to finish!! Looks great and does what I want. Picked it up Friday at the NO BS OBS Truck Show. Thanks for organizing the show and for the terrific parts!
These steps look the best imo, and there's no denying the quality of the design and materials. They are extremely robust, and should last a lifetime, while also being very sturdy compared to the hoop steps. Cost is the only con, but I'm sure r&d plus fabrication wasn't cheap, and I'm happy supporting OBS Solutions!
Very impressed with these lights both in quality and ease of install. They’re WAY brighter than the old lights. They plug in to the original bulb socket perfectly. The instructions are easy to follow. Can’t say enough good about them!