F150 & BRONCO SUSPENSION

Heavy Duty Rear Differential Cover For 8.8 Axle

Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, ge...

Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, gears and axles from the most extreme hits in off road driving. They also increase the structural rigidity of the differential, reducing deflection under high-torque situations that can put severe loads on vital internal parts. Diff Covers feature a durable powder coat finish and high strength steel fasteners for easy bolt-on installation. It’s no secret that the underside of your rig can take a bea...

Stock Replacement 80-96 TTB Bronco/ F150 Driver...

These pivot brackets are designed to retain factory  suspension geometry with a few small strengt...

These pivot brackets are designed to retain factory  suspension geometry with a few small strength advantages added. These are great for anyone looking to replace damaged or missing suspension bracketry when swapping from a drop down bracket type lift kit. Saves time and hassle chasing these parts in the wrecking yards. Includes hardware and semi-gloss black powder coat. These work on both 80-96 Bronco and F150. Sold individually. Note: We strongly recommend using the Desolate Motorsports 413...

Long Travel Rear Shock Mount Kit

Our Long Travel Rear Shock Mount Kit is the perfect solution for being able to run a higher end s...

Our Long Travel Rear Shock Mount Kit is the perfect solution for being able to run a higher end shock in the rear of your OBS Ford.  This kit comes with new upper shock mounts that also act as an additional crossmember for the frame and new shock mounts for the axle.  The new upper shock mounts are able to be positioned ~2.5" higher than the OEM mounts and the new shock mounts on the axle give you an additional ~1.5" for a total of ~4" over stock. With the mounts positioned for the longest sh...

Desolate Motorsports Weld-On Lower Shock Mount ...

Cut from 3/16" plate steel, these mounts have a radiused bottom, designed to fit flush to the axl...

Cut from 3/16" plate steel, these mounts have a radiused bottom, designed to fit flush to the axle housing. This allows you to install at any angle. They weld directly to a 3.250” axle tube but can be modified to fit larger housings. Distance from the axle tube to the shock mounting holes is 3” and uses a 1/2” bolt to attach the shock. Use these for mounting race style shocks with 1.5” mounting spread.  Features: Universal design fits most housings and shocks Heavy duty 3/16 steel constructi...

Desolate Motorsports Trail Runner Rear Suspensi...

Looking to lift the back of your Bronco 4" with out using blocks or having to deal with a complic...

Looking to lift the back of your Bronco 4" with out using blocks or having to deal with a complicated install?  This kit utilizes all the stock brackets and is 100% bolt on. No fabrication is needed which makes this an easy install for the weekend wrencher. It provides 3-4" of lift over stock depending on the vehicle with 14" of wheel travel. This suspension system comes complete with a new pair of leaf springs, Fox Performance Series 2.0 or Bilstein 5100 shocks, and an extended rear brake li...

Desolate Motorsports Stage 2 Mid Travel 4" "BET...

Again we paired popular front and rear kits together to make your life easier. This kit is one st...

Again we paired popular front and rear kits together to make your life easier. This kit is one step up from our stage 2, 4" Daily Combo. The biggest two upgrades are the optional Fox shocks and the Deaver Q80 leaf springs. Doing these upgraded components can make for a more performance oriented ride, more flexibility and by already purchasing the Deaver Q80 spring in the rear, upgrading to long travel down the road is easier. Shock options for this kit, like mentioned are Fox 2.0 or Bilstein ...

Desolate Motorsports Stage 2 Mid Travel 4" "ALL...

This package is the best of what we bring to the table for coil spring mid travel, 4" lift set up...

This package is the best of what we bring to the table for coil spring mid travel, 4" lift set up. The front kit includes our Level 2 TTB housings with camber modification correction performed, we form and weld 3/16 steel plating to all vulnerable areas of the beam and replace the stock urethane bushings for stainless steel 1" uniballs. Replacing the pivot with a uniball gives the beam much more solid engagement in your pivot brackets, eliminates deflection and allows the beam to cycle larger...

Desolate Motorsports Stage 1.5 Performance Kit ...

This entry level performance kit is great way to get started. It will raise the front end of your...

This entry level performance kit is great way to get started. It will raise the front end of your Bronco giving you the ability to run a 35” tire while increasing your suspension travel. We include German engineered Bilstein 5100 series shocks with 2” lift coils to replace your factory components along with your choice of our High Clearance or Billet Radius Arms with high quality 1.25" heim joints and extended front brake line kit. This performance kit will cycle 11” of wheel travel on factor...

Desolate Motorsports Spec Q80 and Shackle Combo...

Designed to handle abuse offroad and still provide amazing ride on-road. This combo comes standar...

Designed to handle abuse offroad and still provide amazing ride on-road. This combo comes standard in most of our high performance rear suspension kits. This pairing will give you the basics you will need to install these springs properly.  Spring option guideline: 2-3" of lift:  choose Q80-2 (pairs great with 3.5 - 4" front lift)on vehicles that are similar to factory weight 4-5" of lift choose Q80 (pairs great with 5-6" lift front or if vehicle is heavier than normal and has 4" lift up from...

Desolate Motorsports Rear Leaf Spring Hardware Kit

This kit consists of common rear components that are needed when replacing your rear springs, re-...

This kit consists of common rear components that are needed when replacing your rear springs, re-indexing pinon angle, or any other adjustment to rear suspension.  Features: 5/8" Diameter U-Bolts 3/8" thick Heavy Duty U-Bolt Plates

Desolate Motorsports NBC 3.5" "DAILY DRIVER" Co...

What is NBC you ask? NBC stands for No Beam Core. This means you finally have an option to purch...

What is NBC you ask? NBC stands for No Beam Core. This means you finally have an option to purchase an awesome suspension system for your 80-96 Bronco or 4x4 F150 with out the hassle of sending us your old core TTB beams. The kit is basically our Stage 1.5 lift with a twist. We added our 2" Drop Beam Pivots with a 2" lift coil paired with an adjustable billet lift spacer giving you that extra boost in ride height you are looking for. Our proprietary three piece billet spacer features an inte...

Desolate Motorsports NBC 3.5" "BETTER" Combo

What is NBC you ask? NBC stands for No Beam Core. This means you finally have an option to purch...

What is NBC you ask? NBC stands for No Beam Core. This means you finally have an option to purchase an awesome suspension system for your 80-96 Bronco or 4x4 F150 with out the hassle of sending us your old core TTB beams. The kit is basically our Stage 1.5 lift with a twist. We added our 2" Drop Beam Pivots with a 2" lift coil paired with an adjustable billet lift spacer giving you that extra boost in ride height you are looking for. Our proprietary three piece billet spacer features an inte...

Desolate Motorsports Ford 8.8 Rear Axle Truss 8...

This truss is an awesome way to extend the life of your factory Bronco or F-150 rear 8.8 axle. Th...

This truss is an awesome way to extend the life of your factory Bronco or F-150 rear 8.8 axle. The Ford 8.8 is a good rear axle but does have its limitations. The cast center section has steel axle tubes pressed into it and after heavy off-roading the tubes can break free of the housing and/or bend. This truss and diff cover remedies both issues. The super heavy-duty differential cover is the backbone of the whole package and then our fabricated truss ties everything together with 6 half inch...

Desolate Motorsports Fabricated Shackle Hanger ...

This fabricated shackle hanger replaces your factory stamped hanger. Our precise geometry changes...

This fabricated shackle hanger replaces your factory stamped hanger. Our precise geometry changes allow for proper rear suspension droop when paired with the Extended Shackle. This is the same hanger used with all Desolate Motorsports leaf spring kits. They bolt directly into existing frame holes for a simple install.  Features: Bolt-on design Will fit aftermarket or stock shackles

Desolate Motorsports Bronco/ F150 Bolt-On Front...

The Desolate Motorsports bolt on front skid plate fits 92-96 Bronco and F150. It's not only a sty...

The Desolate Motorsports bolt on front skid plate fits 92-96 Bronco and F150. It's not only a stylish addition to the front of your truck, but adds protection for your steering components and strength to your front frame rails. Constructed from 1.75" DOM tubing and 3/16" steel brackets all laser cut, notched, fixtured, and welded. Included is a vented, bolt-on skid plate laser cut from 3/16 5052 Aluminum. This skid plate is designed to tuck in beautifully behind the stock front bumper but als...

Desolate Motorsports Bronco 80-96 Heavy Duty Fa...

This Heavy Duty Tie Rod Kit is a Direct Stock Replacement and requires zero suspension modificati...

This Heavy Duty Tie Rod Kit is a Direct Stock Replacement and requires zero suspension modifications to be used on your 1980-1996 Bronco or F150. From completely stock daily drivers to long travel weekend warriors, this is the setup you need! It retains all factory steering geometry, however it has a massive strength advantage due to its much larger diameter components. We've packaged this kit together utilizing the best tie rod ends and components available on the market to make sure you get...